Features:
Compact construction
Optimum performance
Weather proof body
Overload and dry run cut off limit
Features And Protections:
Electronic starter
Electronic overload.
Remote sensing dry run / No load current.
Starting capacitor cut off timer ( CCT ).
Extreme high current (EHC) or short circuit more than 24 amps.
Graded internal setting for overload tripping as per current range.
Starting winding protection during pump running.
High voltage
Low voltage
Fully automatic two tank water level controller.
Starting winding protection during pump running.
Technology:
Microcontroller based digital product with high reliability and long life.
World class MCU and software which is highly fault tolerant to noise and Electro magnetic interferences and noise from motor, starter etc.
Produced in ISO 9001: 2000 certified company.
Control Settings:
Pump current setting is easy, accurate, auto setting type, with digital display.
Pump current setting range is 1-16 amps.
Dry run setting from 75 to 95 % in increment of 1 % amps.
Dry run bypass facility with digital display.
Site selectable Auto / Manual operation switch for panel.
Site selectable Auto / bypass operation switch for level controller.
Monitoring
Calibrated Digital Voltmeter with 100 to 300 volt ± 2 volt. Accuracy.
Calibrated Digital Ammeter 0.5 to 26 amps ± 0.2 amps Accuracy.
Digital display for fault ampere at tripping.
In built memory to show last setting value.
On site AUTO FAULT DETECT (AFT) for AC voltage, LEDS, Display, Relay, etc.
Timers:
Site settable Dry run auto start timer from 10 to 720 minutes with timer OFF facility.
Digital display for countdown timer (Model KDP 99).
On delay timer of 1 minute for auto start at power failure in auto mode.
Time delay to filter power on spikes and surges.
In built time compensation due to power failure during dry run auto start timer i.e. timer will start from same time once power returns.
Capacitor cut off timer to protect starting capacitor.
Additional Features:
Starting (1) and running capacitors (2) as per pump requirements.
Water level control is universal ie can be connected to float / magnetic switch or metal sensors.
Site selectable auto / manual operation facility.
Widest working voltage range from 140 to 300 volts.
Specially made heavy duty air sealed 40 amps dc coil contactor for long life.
Color coded ISI grade copper wiring with lugs for longer life.
Modular design very easy to install and site servicing.
Emergency bypass for water level controller.
|
